Lightweight DIY LED wiring harness x2.
28 gauge ribbon wire harness. Ribbon harness is 10 conductor 36″ in length. Cut to any length you need. LED’s will need to be soldered in place.
LED is soldered to harness which allows for lighter weight installations vs the standard harness which has plug in connectors.
- 2x wire harnesses (1 each for left and right wing halves)
- 36″ – 28 gauge ribbon wire harness
- 10 conductors – 5 wire runs (1 – 3 LEDs per wire run)
- Requires basic soldering skills
- 10″ Servo lead pre-wired for voltage chosen.
LEDs Included (Solid Color)
- 2x Red with Diode
- 2x Green
- 2x Yellow with Diode
- 2x White
- 2x Blue
- Color scheme and LED location should be planned to allow the pilot to differentiate left/right, top/bottom, and front/back of the model while in flight for flying at night.
There are no reviews yet.